Dell Force10 Z9000 Configuration Manual page 131

Related Configuration Tasks
• Changing OSPF Session Parameters
• Disabling BFD for OSPF
Establishing Sessions with OSPF Neighbors
BFD sessions can be established with all OSPF neighbors at once or sessions can be established with all neighbors out of a specific
interface. Sessions are only established when the OSPF adjacency is in the Full state.
Figure 13. Establishing Sessions with OSPF Neighbors
To establish BFD with all OSPF neighbors or with OSPF neighbors on a single interface, use the following commands.
• Establish sessions with all OSPF neighbors.
ROUTER-OSPF mode
bfd all-neighbors
• Establish sessions with OSPF neighbors on a single interface.
INTERFACE mode
ip ospf bfd all-neighbors
Bidirectional Forwarding Detection (BFD)
131