Dell Force10 Z9000 Configuration Manual page 822

diag
When the tests are complete, the system displays the syslog Message 1 shown and automatically reboots the unit.
Dell#00:20:26 : Diagnostic test results are stored on file: flash:/TestReport-SU-0.txt
Dell#00:20:31: %Z9000:0 %DIAGAGT-6-DA_DIAG_DONE: Diags finished on stack unit 0
Diags completed... Rebooting the system now!!!
Diagnostic results are printed to a file in the flash using the filename format TestReport-SU-<stack-unit>.txt.
4. View the results of the diagnostic tests.
EXEC Privilege mode
show file flash://
5. View offline diagnostics.
show diag information or show diag stack-unit
Examples of Running Offline Diagnostics
The following example shows how to take a Z-Series stack unit offline.
Dell#offline stack-unit 0
Warning - offline of stack unit will bring down all the protocols and
the unit will be operationally down, except for running Diagnostics.
Please make sure that stacking/fanout not configured for Diagnostics execution.
Also reboot/online command is necessary for normal operation after the offline command is
issued.
Proceed with Offline [confirm yes/no]:yes
Dell#00:01:34: %STKUNIT0-M:CP %CHMGR-2-STACKUNIT_DOWN: Stack unit 0 down - stack unit
offline
00:01:34: %STKUNIT0-M:CP %IFMGR-1-DEL_PORT: Removed port: Fo 0/
0,4,8,12,16,20,24,28,32,36,40,44,48,52,56,60,64,68,72,76,80,84,88,92,96,100,104,108,112,116,
120,124,
The following example shows how to verify the offline/online status of a Z-Series stack unit.
Dell#show system brief | no-more
Stack MAC : 00:01:e8:a9:81:9e
Reload-Type : normal-reload [Next boot : normal-reload]
-- Stack Info --
Unit UnitType Status
--------------------------------------------------------
0 Management offline
1 Member not present
2 Member not present
3 Member not present
4 Member not present
5 Member not present
6 Member not present
7 Member not present
-- Power Supplies --
Unit Bay Status Type Temperature(deg C) FanSpeed(rpm)
----------------------------------------------------
0 0 up AC
0 1 up AC
-- Fan Status --
Unit Bay TrayStatus Fan0 Speed Fan1 Speed
----------------------------------------
0 0 up
0 1 up
0 2 up
0 3 up
822
Z-Series Debugging and Diagnostics
ReqTyp CurTyp Version Ports
Z9000 Z9000
40
42
up 0 up 0
up 16000 up 16000
up 16000 up 16000
up 16000 up 16000
9-0-0-0 128
13888
14851