Private Vlan Configuration Example - Dell Force10 Z9000 Configuration Manual

tagged interface or untagged interface
You can enter the interfaces singly or in range format, either comma-delimited (slot/port,port,port) or hyphenated
(slot/ port-port).
You can only add ports defined as host to the VLAN.
Example of Configuring Private VLAN Members
The following example shows the use of the PVLAN commands that are used in VLAN INTERFACE mode to configure the PVLAN
member VLANs (primary, community, and isolated VLANs).
Dell#conf
Dell(conf)# interface vlan 10
Dell(conf-vlan-10)# private-vlan mode primary
Dell(conf-vlan-10)# private-vlan mapping secondary-vlan 100-101
Dell(conf-vlan-10)# untagged Te 2/1
Dell(conf-vlan-10)# tagged Te 2/3
Dell(conf)# interface vlan 101
Dell(conf-vlan-101)# private-vlan mode community
Dell(conf-vlan-101)# untagged Te 2/10
Dell(conf)# interface vlan 100
Dell(conf-vlan-100)# private-vlan mode isolated
Dell(conf-vlan-100)# untagged Te 2/2

Private VLAN Configuration Example

The following example shows a private VLAN topology.
Figure 90. Sample Private VLAN Topology
564
Private VLANs (PVLAN)