Dell Force10 Z9000 Configuration Manual page 766

Hide thumbs Also See for Force10 Z9000:
Table of Contents

Advertisement

Configure the backup link between the VLT peer units.
1.
Configure the peer 2 management ip/ interface ip for which connectivity is present in VLT peer 1.
2.
Configure the peer 1 management ip/ interface ip for which connectivity is present in VLT peer 2.
s4810-2#show running-config vlt
!
vlt domain 5
peer-link port-channel 1
back-up destination 10.11.206.58
s4810-2# show interfaces managementethernet 0/0
Internet address is 10.11.206.43/16
s4810-4#show running-config vlt
!
vlt domain 5
peer-link port-channel 1
back-up destination 10.11.206.43
s4810-4#
s4810-4#show running-config interface managementethernet 0/0
ip address 10.11.206.58/16
no shutdown
Configure the VLT links between VLT peer 1 and VLT peer 2 to the Top of Rack unit. In the following example, port Te 1/4 in VLT peer
1 is connected to Te 1/8 of TOR and port Te 1/18 in VLT peer 2 is connected to Te 1/30 of TOR.
1.
Configure the static LAG/LACP between the ports connected from VLT peer 1 and VLT peer 2 to the Top of Rack unit.
2.
Configure the VLT peer link port channel id in VLT peer 1 and VLT peer 2.
3.
In the Top of Rack unit, configure LACP in the physical ports (shown for VLT peer 1 only. Repeat steps for VLT peer 2. The bold
vlt-peer-lag port-channel 2 indicates that port-channel 2 is the port-channel id configured in VLT peer 2).
s4810-2#show running-config interface tengigabitethernet 1/4
!
interface TenGigabitEthernet 1/4
no ip address
!
port-channel-protocol LACP
port-channel 2 mode active
no shutdown
configuring VLT peer lag in VLT
s4810-2#show running-config interface port-channel 2
!
interface Port-channel 2
no ip address
switchport
vlt-peer-lag port-channel 2
no shutdown
s4810-2#show interfaces port-channel 2 brief
Codes: L - LACP Port-channel
LAG
Mode
Status
L
2
L2L3
up
In the ToR unit, configure LACP on the physical ports.
s60-1#show running-config interface tengigabitethernet 1/8
!
interface TenGigabitEthernet 1/8
no ip address
!
port-channel-protocol LACP
766
Virtual Link Trunking (VLT)
Uptime
Ports
03:33:14
Te 1/4 (Up)

Advertisement

Table of Contents
loading

Table of Contents