Enabling 802.1X - Dell Force10 Z9000 Configuration Manual

Enabling 802.1X

Enable 802.1X globally.
Figure 6. 802.1X Enabled
1. Enable 802.1X globally.
CONFIGURATION mode
dot1x authentication
2. Enter INTERFACE mode on an interface or a range of interfaces.
INTERFACE mode
interface [range]
3. Enable 802.1X on the supplicant interface only.
INTERFACE mode
dot1x authentication
Examples of Verifying that 802.1X is Enabled Globally and on an Interface
Verify that 802.1X is enabled globally and at the interface level using the show running-config | find dot1x command
from EXEC Privilege mode.
76
802.1X