Dell Force10 Z9000 Configuration Manual page 55

The audit log contains configuration events and information. The types of information in this log consist of the following:
• User logins to the switch.
• System events for network issues or system issues.
• Users making configuration changes. The switch logs who made the configuration changes and the date and time of the
change. However, each specific change on the configuration is not logged. Only that the configuration was modified is logged
with the user ID, date, and time of the change.
• Uncontrolled shutdown.
Security Logs
The security log contains security events and information. RBAC restricts access to audit and security logs based on the CLI
sessions' user roles. The types of information in this log consist of the following:
• Establishment of secure traffic flows, such as SSH.
• Violations on secure flows or certificate issues.
• Adding and deleting of users.
• User access and configuration changes to the security and crypto parameters (not the key information but the crypto
configuration)
Important Points to Remember
When you enabled RBAC and extended logging:
• Only the system administrator user role can execute this command.
• The system administrator and system security administrator user roles can view security events and system events.
• The system administrator user roles can view audit, security, and system events.
• Only the system administrator and security administrator user roles can view security logs.
• The network administrator and network operator user roles can view system events.
NOTE: If extended logging is disabled, you can only view system events, regardless of RBAC user role.
Example of Enabling Audit and Security Logs
Dell(conf)#logging extended
Displaying Audit and Security Logs
To display audit logs, use the show logging auditlog command in Exec mode. To view these logs, you must first enable the
logging extended command. Only the RBAC system administrator user role can view the audit logs. Only the RBAC security
administrator and system administrator user role can view the security logs. If extended logging is disabled, you can only view system
events, regardless of RBAC user role. To view security logs, use the show logging command.
Example of the show logging auditlog Command
For information about the logging extended command, see
Dell#show logging auditlog
May 12 12:20:25: Dell#: %CLI-6-logging extended by admin from vty0 (10.14.1.98)
May 12 12:20:42: Dell#: %CLI-6-configure terminal by admin from vty0 (10.14.1.98)
May 12 12:20:42: Dell#: %CLI-6-service timestamps log datetime by admin from vty0
(10.14.1.98)
Example of the show logging Command for Security
For information about the logging extended command, see
Dell#show logging
Jun 10 04:23:40: %STKUNIT0-M:CP %SEC-5-LOGIN_SUCCESS: Login successful for user admin on
Enabling Audit and Security Logs
Enabling Audit and Security Logs
55
Management