Dell Force10 Z9000 Configuration Manual page 767

port-channel 100 mode active
no shutdown
s60-1#show running-config interface tengigabitethernet 1/30
!
interface TenGigabitEthernet 1/30
no ip address
!
port-channel-protocol LACP
port-channel 100 mode active
no shutdown
s60-1#show running-config interface port-channel 100
!
interface Port-channel 100
no ip address
switchport
no shutdown
s60-1#show interfaces port-channel 100 brief
Codes: L - LACP Port-channel
LAG Mode Status
L 100 L2 up
Verify VLT is up. Verify that the VLTi (ICL) link, backup link connectivity (heartbeat status), and VLT peer link (peer chassis) are all
up.
s4810-2#show vlt brief
VLT Domain Brief
------------------
Domain ID:
Role:
Role Priority:
ICL Link Status:
HeartBeat Status:
VLT Peer Status:
Local System MAC address:
Remote System MAC address: 00:01:e8:8c:4d:1c
s4810-2#show vlt detail
Local LAG Id Peer LAG Id Local Status Active VLANs
------------ ----------- ------------ ------------
2 2
Verify that the VLT LAG is up in both VLT peer units.
s4810-2#show interfaces port-channel 2 brief
Codes: L - LACP Port-channel
LAG Mode Status
L 2 L2L3 up
s4810-4#show interfaces port-channel 2 brief
Codes: L - LACP Port-channel
LAG Mode Status
L 2 L2L3 up
Uptime Ports
03:33:48 Te 1/8 (Up)
Te 1/30 (Up)
5
Primary
32768
Up
Up
Up
00:01:e8:8c:4d:08
Up 1000-1199
Uptime Ports
03:43:24 Te 1/4 (Up)
Uptime Ports
03:33:31 Te 1/18 (Up)
Virtual Link Trunking (VLT)
767