Parameter
EMS Services Table
configure system >
http-proxy > ems-
serv
[EMSService]
User's Manual
Defines an HTTP-based EMS Service so that the device can act as
an HTTP Proxy that enables AudioCodes EMS to manage
AudioCodes equipment (such as IP Phones) over HTTP when the
equipment is located behind NAT (e.g., in the LAN) and EMS is
located in a public domain (e.g., in the WAN).
The format of the ini file table parameter is as follows:
[ EMSService ]
FORMAT EMSService_Index = EMSService_ServiceName,
EMSService_PrimaryServer, EMSService_SecondaryServer,
EMSService_DeviceLoginInterface, EMSService_EMSInterface;
[ \EMSService ]
For a description of the table, see 'Configuring an HTTP-based EMS
Service' on page 289.
1176
Mediant 800B Gateway and E- SBC
Description
Document #: LTRT-10296