Table of Contents
Advertisement
XPS-Q8 Controller
1.2
Definitions and Symbols
The following terms and symbols are used in this documentation and also appear on the
XPS Series Controller/Driver where safety-related issues occur.
1.2.1
General Warning or Caution
The Exclamation Symbol in Figure 1 may appear in Warning and Caution tables in this
document. This symbol designates an area where personal injury or damage to the
equipment is possible.
1.2.2
Electric Shock
The Electrical Shock Symbol in Figure 2 may appear on labels affixed to the XPS
Series Controller/Driver. This symbol indicates a hazard arising from dangerous
voltages. Any mishandling could result in damage to the equipment, personal injury, or
even death.
1.2.3
European Union CE Mark
The presence of the CE Mark on Newport Corporation equipment means that it has
been designed, tested and certified to comply with all current and applicable European
Union (CE) regulations and recommendations.
1.2.4
"ON" Symbol
The "ON" Symbol in Figure 4 appears on the power switch of the XPS Series
Controller/Driver. This symbol represents the "Power On" condition.
1.2.5
"OFF" Symbol
The "Off" Symbol in Figure 5 appears on the power switch of the XPS Series
Controller/Driver. This symbol represents the "Power Off" condition.
Figure 1: General Warning or Caution Symbol.
Figure 2: Electrical Shock Symbol.
Figure 3: CE Mark.
Figure 4: "ON" Symbol.
Figure 5: "OFF" Symbol.
3
XPSDocumentation V1.4.x (EDH0301En1060 — 10/17)
User's Manual
Advertisement
Table of Contents
