Table of Contents
Advertisement
XPS-Q8 Controller
XPSDocumentation V1.4.x (EDH0301En1060 — 10/17)
Like most gantries, the two positioners are rigidly attached to each other. Hence, all
motions, including motor initialization, homing, and emergency stops must be done
in perfect synchronization. For details about Gantries and their configuration, please
refer to section 4.9.
Specify the Time Flash Base Frequency value, default is 40E6 (must be between
39.5E6 and 40.5E6 Hz).
When all positioners are configured, click on "VALID" to confirm the group
configuration.
4. When the configuration of each positioner is validated, the new group is listed in the
"New system build" window.
5. Do the same for all other motion groups. When done, click on "Generate config files
and Boot" to apply the new configuration.
42
Software Tools
Advertisement
Table of Contents
