Table of Contents
Advertisement
XPS-Q8 Controller
XPSDocumentation V1.4.x (EDH0301En1060 — 10/17)
Click "Initialize". The State number changes from 0 to 42 and the Action button
changes from "Initialize" to "Home". Click "Home". The stage starts moving to find its
reference position. When done, the state number is 11 and the action button changes to
disable. Enter an allowed position value in the "Abs move 1" field and click "Go". The
stage moves to this absolute position.
Your system is now ready to use. For more advanced functions, please read the rest of
this manual.
In "AUTO-CONFIGURATION" the default group is set as SingleAxis. To set the
positioners to a different group type, use manual configuration.
30
NOTE
User's Manual
Advertisement
Table of Contents
