Table of Contents
Advertisement
XPS-Q8 Controller
3.0
Getting Started
XPSDocumentation V1.4.x (EDH0301En1060 — 10/17)
3.1
Unpacking and Handling
It is recommended that the XPS Controller/Driver be unpacked in your lab or work site
rather than at the receiving dock. Unpack the system carefully; small parts and cables
are included with the equipment. Inspect the box carefully for loose parts before
disposing of the packaging. You are urged to save the packaging material in case you
need to ship your equipment.
3.2
Inspection for Damage
XPS Controller/Driver has been carefully packaged at the factory to minimize the
possibility of damage during shipping. Inspect the box for external signs of damage or
mishandling. Inspect the contents for damage. If there is visible damage to the
equipment upon receipt, inform the shipping company and Newport Corporation
immediately.
Do not attempt to operate this equipment if there is evidence of
shipping damage or you suspect the unit is damaged. Damaged
equipment may present additional personnel hazard. Contact
Newport technical support for advice before attempting to plug in
and operate damaged equipment.
3.3
Packing List
Included with each XPS controller are the following items:
• User's Manual and Motion Tutorial.
• XPS controller.
• Cross-over cable, gray, 3 meters.
• Straight-through cable, black, 5 meters.
• Power cord.
• Rack mount ears and handles.
If there are missing hardware or have questions about the hardware that were received,
please contact Newport.
Before operating the XPS controller, please read chapter 1.0 very
carefully.
3.4
System Setup
This section guides the user through the proper set-up of the motion control system. If
not already done, carefully unpack and visually inspect the controller and stages for any
damage. Place all components on a flat and clean surface.
First, the controller must be configured properly before stages can be connected.
WARNING
CAUTION
CAUTION
No cables should be connected to the controller at this point!
14
User's Manual
Advertisement
Table of Contents
