Table of Contents
Advertisement
XPS-Q8 Controller
XPSDocumentation V1.4.x (EDH0301En1060 — 10/17)
17. Click on "VALID" to return to the initial screen.
18. Continue the same way with the other motion groups.
19. When done, click on "Create new system.ini file" to complete the System
configuration. The controller re-boots and the following message appears:
Click on "OK".
When the controller has finished booting (a second beep after 12-18 seconds), press
"F5" to reload the page, select FRONT PANEL, then select "Move". The following
screen appears (Group names will be different according to your definition):
Click "Initialize". The State number changes from 0 to 42 and the Action button
changes from "Initialize" to "Home". Click "Home". The stage starts moving to find its
reference position. When done, the state number is 11 and the action button is
"Disable". Enter an allowed position value in the "Abs move 1" field and click "Go".
The stage moves to this absolute position.
Your system is now ready to use. For more advanced functions, please read the rest of
this manual.
34
User's Manual
Advertisement
Table of Contents
