Settings; Local Remote Control Locremctrl; Identification; Functionality - ABB Relion 650 Series REB650 Technical Manual

1MRK 505 288-UEN A
10.2.6.5
Table 115: LOCREM Non group settings (basic)
Name Values (Range)
ControlMode
10.2.7
10.2.7.1
10.2.7.2
Technical manual
Table 114: LOCREM Output signals
Name
OFF
LOCAL
REMOTE
VALID

Settings

Unit
Internal LR-switch -
External LR-switch

Local remote control LOCREMCTRL

Identification

Function description
Local remote control

Functionality

The signals from the local HMI or from an external local/remote switch are applied via
the function blocks LOCREM and LOCREMCTRL to the Bay control QCBAY
function block. A parameter in function block LOCREM is set to choose if the switch
signals are coming from the local HMI or from an external hardware switch connected
via binary inputs.
Type Description
BOOLEAN Control is disabled
BOOLEAN Local control is activated
BOOLEAN Remote control is activated
BOOLEAN Outputs are valid
Step Default
- Internal LR-switch
IEC 61850
identification
LOCREMCTRL
Section 10
Description
Control mode for internal/external LR-
switch
IEC 60617 ANSI/IEEE C37.2
identification device number
- -
Control
185