Log Custom - Thermo Scientific TVA2020 Instruction Manual

Thermo Fisher Scientific
Approximately 2900 data samples may be taken.
●

Log Custom

The TVA2020 has several pre-designed logging methods. However, if you
find that you would prefer to log data in a different fashion, you can use
Custom logging to create your own log type. The TVA2020 will prompt
you through a series of questions which will assist you in setting the various
logging options. The end result is a logging method which collects data the
way you want it to.
The following variable settings can be configured when designing a Custom
log method.
1. Log data type
This setting allows you to choose the format in which data will be saved.
The choices are as follows:
a. None.
b. Auto – Data stored in a fashion similar to Auto logging (tag,
c. VOC – Data stored in a fashion similar to VOC logging (Tag,
d. FE – Data stored in a fashion similar to FE logging.
2. Sample time
This setting allows you to adjust the sampling interval.
3. Log time units
calibration information, Detector Counts, time/date, alarms).
Calibration Information, Detector Counts, time/date, alarms).
Display Menus
Log Methods
TVA2020 Instruction Manual 3-21