Voc Logging With The Enhanced Probe - Thermo Scientific TVA2020 Instruction Manual

Optional Accessories
Enhanced Probe Option
VOC Logging with
the Enhanced Probe
8-6 TVA2020 Instruction Manual
0.66
PID
Tag:
0.59ppm
2.50ppm
Sampling:
5. Once EXIT is selected, you may enter another tag and begin logging
again or exit from the RUN mode.
Use the following procedure to use the enhanced probe in VOC logging
mode.
1. In the RUN mode, from the Opening menu, press the select key to
"Enter logging mode."
2. Use the sidepack to enter a tag, or simply select "Accept" to enter a
blank tag.
3. Choose "Start log sampling" to begin Auto logging.
4. The Enhanced probe will display the count down for the interval
selected in the SETUP menu and freeze on the reading to be saved
(Maximum, Average, or Last Reading).
0.66
PID
Tag:
0.59ppm
2.50ppm
[Sav] –Again
5. You may choose to save the reading (SAV), repeat the reading for the
same tag (AGAIN), or return to the previous menu (EXIT).
ppm
PID
FID
3s [Exit]
ppm
PID
FID
-Exit
Thermo Fisher Scientific