Setup Menu; Calibration Settings - Thermo Scientific TVA2020 Instruction Manual

Setup Menu

Calibration
Settings
Thermo Fisher Scientific
3. Log readings by following the monitoring route shown on the
TVA2020 display.
4. At the end of the monitoring route, copy the logged readings to the
personal computer.
The Setup Menu (configuration) of the TVA2020 is the most important
step in obtaining accurate gas measurements. The Setup Menu contains
configuration procedures and menu structure for performing calibrations,
entering ID numbers, setting alarm levels, selecting log modes, entering
response multipliers and setting time/date.
From the MAIN MENU display, press 1=Run.
SETUP MENU
1=Calib
3=Log 4=Passcode
5=Other
During instrument setup, you must set parameters as follows:

5. Calibration Settings

6. Alarm Levels
7. Datalogging Setup
8. Passcode
9. Other
The Calibration Menu is used to calibrate the instrument. For more
detailed information on calibration, see Chapter 4, "Calibration".
From the MAIN MENU display, press 2-Setup.
From the SETUP MENU display, press 1=Calib.
2=Alarm
Display Menus
Setup Menu
TVA2020 Instruction Manual 3-9