Thermo Scientific TVA2020 Instruction Manual page 47

Thermo Fisher Scientific
key is pressed, the first screen viewed is the one shown below. The tag
information should be typed. The tag may be left blank if desired.
Note Tag information can only be entered using the sidepack keypad.
FID
FID: 24950ppm
----------------
Press char key
The tag information should be typed in before starting. Enter the tag
information in the space provided (up to 10 characters).The tag may be left
blank if desired.
FID
FID: 24950ppm
TA --------------
0=3 1=G 2=H 3=I
Once the tag information is entered, press the ENTER key. The screen
then changes to the next display. The instrument is now ready to start
logging. The screen displays live readings and the tag name but no logging
takes place until you either enter the logging mode from the enhanced
probe or press the ENTER key again on the instrument.
FID
FID: 24950ppm
TAG
Enter=Start log
PID/FID
PID: 1.1ppm
FID: 2.49%
----------------
Press char key
PID/FID
PID: 1.1ppm
FID: 2.49%
TA --------------
0=3 1=G 2=H 3=I
PID/FID
PID: 1.1ppm
FID: 2.49%
TAG
Enter=Start log
TVA2020 Instruction Manual
Display Menus
Run Mode
▲
3-7