Accessing The Log Menu; Log None - Thermo Scientific TVA2020 Instruction Manual

Display Menus
Log Methods
Accessing the LOG
3-16 TVA2020 Instruction Manual
The RUN mode displays (as governed by the LOG selection) are:
FID:
Exit=Stop
FID-AUTO, VOC, or F.E.
FID:
Sampling:
Exit=Stop
Note To display and change the log menu, the instrument must be ON
but does not have to be warmed up.
Use the following procedure to access the log menu.
Menu
1. From the MAIN MENU display, press 2=Setup.
2. From the SETUP MENU display, press 3=Log.
3=VOC/FE 4=Custm
The previous log selection is displayed on the second line. Follow the
procedure below to set the log mode.

Log None

From the LOG MODE menu, press 1=None to display this message
briefly. The screen then returns to the SETUP MENU.
FID-NONE
1376ppm
1376ppm
3sec
LOG MODE
None
1=None 2=Auto
PID/FID-NONE
PID: 1042ppm
FID: 1376ppm
Exit=Stop
PID/FID-AUTO, VOC, or F.E.
PID: 1042ppm
FID: 1376ppm
Sampling:
Exit=Stop
▲
3sec
Thermo Fisher Scientific