Control Menu - Thermo Scientific TVA2020 Instruction Manual

Control Menu

Thermo Fisher Scientific
The Control Menu is used for turning the sampling pump on and off,
turning the PID lamp and FID on and off, for initiating gas ignition of
FID, and Bluetooth and GPS options.
CONTROL MENU
1=Pump on
2=FID on
4=PID on
The CONTROL MENU screen has five options:
1. Turn Pump ON/OFF
2. Turn FID ON/OFF
3. Ignite FID
4. Turn PID OFF/ON
5. More (Bluetooth and GPS)
Selecting Option 1 toggles the pump on or off.
Selecting Option 2 toggles the FID on or off. In the RUN mode, when the
FID is off, dashes will appear instead of a reading and all FID alarms are
overridden.
Selecting Option 3 initiates the FID flame ignition sequence, which
momentarily turns on the ignite coil and simultaneously reduces the pump
flow.
Selecting Option 4 toggles the PID on or off. In the RUN mode, when the
PID is off, dashes will appear instead of a reading, and all PID alarms are
overridden.
Selecting Option 5 toggles the next screen, if Bluetooth or GPS are
installed. If neither is installed, option 5 does not display.
3=Ignt
5=More
Hardware and Startup
Control Menu
TVA2020 Instruction Manual 2-9