Passcode Protection; New Passcode; Enable - Thermo Scientific TVA2020 Instruction Manual

Passcode
Protection

New Passcode

Thermo Fisher Scientific
The TVA2020 Setup Menu can be passcode protected. This option allows
you to protect the setup parameters from anyone who is not familiar with
your 6-digit passcode. If this feature is enabled, you need to enter your
passcode each time you choose to display the SETUP menu.
1. From the MAIN MENU display, press 2-Setup.
2. From the SETUP MENU display, press 4=Passcode.
3. Press ENTER to accept passcode.
2=Enabl 3=Disabl
New Passcode allows you to enter and/or change the 6-digit calibration
passcode. You may use any characters from the alphanumeric keypad in
your passcode. You must then verify the passcode to make sure you have
entered it properly.
From the PASSCODE MENU display, press 1=New Passcode.
Enter passcode:
1=S 2=T 3=U

Enable

Enable allows you to activate the passcode protection feature. Once this
feature is activated, you must enter your passcode whenever you request
access to the SETUP MNEU. Once passcode protection has been enabled
and you exit the SETUP MENU, the option can only be disabled by
entering the passcode to gain access to the SETUP MENU again.
REMEMBER YOUR PASSCODE!
PASSCODE MENU
Disabled
1=New Passcode
THER___
0=7
TVA2020 Instruction Manual
Display Menus

Passcode Protection

3-23