Logged Data - Thermo Scientific TVA2020 Instruction Manual

Logged Data

Thermo Fisher Scientific
The logged data is stored in binary format in MRAM, when the user enters
the USB transfer mode the software generates the LOG.TXT file.
The logged data is stored as LOG.TXT in the following format:
Format
LOGGED DATA<CR><LF>
VER=xx.xx
<logged data record 1>
<logged data record n>
<CR><LF>
END<CR><LF>
The logged data record is different for each data storage type. A header is
printed whenever the data storage type changes, a new auto run starts, or
the configuration (excluding background) changes. The data type records
are:
<auto logging record>
<voc logging record>
<fe logging record>
Auto logged header and data, single detector, GPS off:
<CR><LF>
AUTO DATA tttttttttttttttt<CR><LF>
DATE
--------- -------- -------------------- --------------------<CR><LF>
dd mmm yy hh:mm:ss xxxxxx uuu fffffffff xxxxxx uuu fffffffff<CR><LF>
Auto logged header and data, dual detector, GPS off:
<CR><LF>
AUTO DATA tttttttttttttttt<CR><LF>
DATE TIME PID BACKGROUND
--------- -------- -------------------- -------------------- /
dd mmm yy hh:mm:ss xxxxxx uuu fffffffff xxxxxx uuu fffffffff /
Comments
Title, not processed
xxxxx=ver, right just, lead spaces
See below
.
.
.
Blank line, not processed
Marks end-of-text
TIME ddd BACKGROUND
PID CONCENTRATION
FID BACKGROUND
-------------------- --------------------<CR><LF>
xxxxxx uuu fffffffff xxxxxx uuu fffffffff<CR><LF>
Text Data Formats
Logged Data
ddd CONCENTRATION <CR><LF>
/
FID CONCENTRATION <CR><LF>
TVA2020 Instruction Manual B-17