Auto Logging With The Enhanced Probe; Table 8-2. Enhanced Probe Menu - Thermo Scientific TVA2020 Instruction Manual

Auto Logging with
the Enhanced Probe
Thermo Fisher Scientific
0.66
PID
Tag:
[Enter logging mode]
-Ignite
-Background
The highlighted menu item is the item surrounded by brackets. Pressing
the MENU key will cause the brackets to move from menu item to menu
item. When you reach the menu item you wish to choose, press SELECT.
The Opening menu items are as follows:
Table 8–2. Enhanced Probe Menu
Menu Item
Enter logging mode
Ignite
Other det
Background
Exit
Use the following procedure to use the enhanced probe in auto logging
mode.
1. In the RUN mode, from the Opening menu, press the select key to
"Enter logging mode."
2. Use the sidepack to enter a tag, or simply select "Accept" to enter a
blank tag.
3. Choose "Start log sampling" to begin Auto logging.
4. The Enhanced probe will display the countdown and continue to log
until EXIT is selected at the probe or the sidepack keypad.
ppm
-other det
-Exit
Function
Enters FE, VOC, or Auto logging mode, allowing you to enter
tags, toggle through route files, log data, etc. If no logging is
selected in the SETUP menu, then this selection does not
appear.
Ignites FID.
Toggles between FID and PID reading. This selection does not
appear in single detector models.
Records a new background reading.
Clears the menu and returns to the bar graph display.
Optional Accessories
Enhanced Probe Option
TVA2020 Instruction Manual 8-5