Thermo Scientific TVA2020 Instruction Manual page 29

Overview
Thermo Fisher Scientific
Chapter 2
Hardware and Startup
For a description of the instrument functions, instrument connections, and
how to start the instrument, see the following topics:
"Overview" on page 2-1
●
"Instrument Functions" on page
●
"Using the Instrument" on page
●
"Instrument Connections" on page
●
"Instrument Sidepack
●
"Instrument Sidepack
●
"Control Menu" on page
●
"Quick Start Procedure" on page
●
The vapor concentration may be read immediately on either of two
displays—one mounted directly on the optional enhanced sample probe
and the other on the instrument sidepack itself (see
concentration can be displayed on both displays in parts per million (ppm)
or percent concentration (%). The data displayed may also be collected and
saved in analyzer memory and downloaded to a personal computer for
analysis. The optional Bluetooth device will continuously output the
concentration data for use with a third party hand-held device.
Through the sidepack keyboard, choose the mode of operation, select
concentration units for the display, set alarm thresholds, select data
collection mode, and change setup (configuration) parameters.
This unit is shipped with the battery installed. The unit is ready for
operation upon completion of setup, calibration, and charging.
2-3
2-4
2-4
Display" on page 2-6
Keypad" on page 2-7
2-9
2-10
Figure 2–1). Vapor
TVA2020 Instruction Manual 2-1