Thermo Scientific TVA2020 Instruction Manual page 184

Text Data Formats
Logged Data
B-20 TVA2020 Instruction Manual
hh = Hours (0-23)
mm = Minutes (0-59)
ss = Seconds (0-59)
tttttttttttttttt = tag ID left justified space padded.
NOTE: The following DBID fields are only displayed if a
hidden database ID is defined in the route database.
ih... = dbid header (1-16 characters, centered, space padded)
is... = dbid separator (1-16 -)
iii... = dbid (1-16 characters, user defined in route database)
th... = tag header (1-16 characters, centered, space padded)
ts... = tag separator (1-16 -)
ttt... = tag (1-16 characters, user defined in route database)
NOTE: The following comment fields are only displayed if a
Comment is defined in the route database file.
ch... = comment header (0-16 characters, centered, space padded)
cs... = comment separator (0-80 -)
ccc... = comment (0-80 characters, user input during log)
xxxxxx = concentration, floating point, right justified,
leading spaces, or
"------" when DET_OFF
uuu = concentration unit determined by the current unit_lock at
the time of the upload:
"PPB"
"PPM"
"% "
fffffffff = data status:
"OK ", no errors or alarms
"DET_OFF ", detector not valid
"DET_FAIL ", detector failed, not "DET_OFF"
"BAD_CALIB", invalid calibration parameters
"OVERFLOW ", A/D overflow, not "DET_FAIL"
"UNDERFLOW", A/D underflow, not "OVERFLOW"
"CAL_SLOPE", calibration sensitivity out of range
"CLAMPED ", an intermediate concentration exceeded 100%
"AVG_OVFLW", during log point averaging, an overflow occured
"LOW_FLOW ", low sample flow detected
"HIGH_ALRM", high alarm, no STEL, not "UNDERFLOW"
"LOW_ALARM", low alarm, no high alarm or STEL, not "UNDERFLOW"
"STEL_ALRM", STEL alarm, no low or high alarm, not "UNDERFLOW"
"HIGH&STEL", high alarm and STEL, not "UNDERFLOW"
"LOW&STEL ", low alarm and STEL, no high alarm, not "UNDERFLOW"
ddd = detector:
"PID"
"FID"
lllllll = leak indicator:
" OK ", no leak
"LEAKER!", leak
Thermo Fisher Scientific