Table of Contents
Advertisement
656|
Effects for the Sounds, Voice, Guitar
Stereo Limiter
The Limiter regulates the input signal level. It is similar to the Compressor,
except that the Limiter compresses only signals that exceed the specified
level to lower unnecessary peak signals. The Limiter applies a peaking-type
EQ to the trigger signal (which controls the degree of the Limiter effect), al-
lowing you to set any band width to be covered. This effect is a stereo limiter.
You can link left and right channels, or use each channel individually.
Stereo In - Stereo Out
Left
+
Envelope Source
Right
FX Control BUS 1
FX Control BUS 2
a
Envelope Select
b
Ratio
c
Threshold [dB]
v
Attack
Release
e
Gain Adjust [dB]
Src
Amt
f
Side PEQ Insert
Trigger Monitor
Side PEQ
Envelope - Control
Envelope - Control
Envelope Select
L/R Mix,
L Only, R Only,
L/R Individually
1.0 : 1...
50.0 : 1,
Inf : 1
–40...0
1...100
1...100
–Inf, –38...+24
Off...Tempo
–63...+63
Off, On
Off, On
FX Amt
Gain Adjust
Limiter
Trigger Monitor
Limiter
Gain Adjust
FX Amt
Selects from linking both channels,
controlling only from left channel,
only from the right channel, or con-
trolling each channel individually
Sets the signal compression ratio
Sets the level above which the com-
pressor is applied
Sets the attack time
Sets the release time
Sets the output gain
Selects the modulation source for the
output gain
Sets the modulation amount of the
output gain
Toggles between on/off of the trigger
signal's EQ
Switches between effect output moni-
tor and trigger signal monitor
Advertisement
Table of Contents
