Korg PA1000 User Manual page 585

St. Multitap Delay (Stereo Multitap Delay)
The left and right Multitap Delays have two taps respectively. Changing the
routing of feedback and tap output allows you to create various patterns of
complex effect sounds.
Stereo In - Stereo Out
Left
Input Level D-mod
High Damp Low Damp
Mode
High Damp Low Damp
Input Level D-mod
Right
a Mode
b Tap1 Time [msec]
c Tap2 Time [msec]
d Tap1 Level
e Feedback (Tap2)
Src
Amt
f High Damp [%]
g Low Damp [%]
h Input Level Dmod
[%]
Src
i Spread
Src
Amt
Feedback
Delay
(2)
(1)
Mode
Tap1 Level
(1)
(2)
Delay
Feedback
Normal, Cross Switches the left and right delay routing
Feedback, Cross
Pan1, Cross
Pan2
0.0...1360.0 Sets the Tap1 delay time
0.0...1360.0 Sets the Tap2 delay time
0...100 Sets the Tap1 output level
–100...+100 Sets the Tap2 feedback amount
Off...Tempo Selects the modulation source of the Tap2
feedback amount
–100...+100 Sets the modulation amount of the Tap2
feedback amount
0...100 Sets the damping amount in the high
range
0...100 Sets the damping amount in the low range
–100...+100 Sets the modulation amount of the input
level
Off...Tempo Selects the modulation source for the in-
put level
–100...+100 Sets the width of the stereo image of the
effect sound
Off...Tempo Selects the modulation source of the ef-
fect sound's stereo image width
–100...+100 Sets the modulation amount of the effect
sound's stereo image width
Effect parameters |573
FX Amt
Tap1=(1)
Spread
Tap2=(2)
FX Amt