Mixing The Drum Kit Layers - Korg PA1000 User Manual

406| Customizing and editing the Sounds

Mixing the Drum Kit layers

You can see all the drum samples, dry/ambient levels, and velocity switches
of the available layers in a single page. While in this page, you can see which
layer is playing.
▪
Go to the Sound > DrumKit > Velocity Switch Levels
View which layer is playing
▪
Play a note on the keyboard. Depending on the velocity, an indicator will turn
on on the extreme right of the page, next to the layer that is playing.
Choose the drum sample
▪
Use the ROM/RAM
▪
Use the drum sample name
each layer.
Adjust the dry/ambient level
▪
Use the Dry Level
and ambient portion of the sound.
Adjust the velocity switch
▪
Use the Vel parameter to adjust the velocity switch between the layers.
parameter to choose the bank (ROM or RAM).
parameter to assign a different drum sample to
and Amb Level parameters to adjust the level of the dry
page.