478|
Customizing and editing the Sounds
Overview of the assigned samples and zones
You can see the overall map of the samples assigned to the zones, and edit
their range on the keyboard.
▪
Go to the
Sampling > Multisample > Key Assign
Samples
▪
Scroll the zones by using the
big button with an arrow on top and to the bottom of the list to scroll the list
up or down.
▪
Edit the
zone
appearing on the left and the right of the keyboard diagrams. The Original
Note is shown in red.
list of samples
range, when needed, by using the low and high zone limits
page.
on the left of the page. Use the
Multisample
diagram
Zones