Using The Audio Groove Slices In Other Sounds - Korg PA1000 User Manual

494| Customizing and editing the Sounds
Using the audio Groove Slices in other
Sounds
You can use the multisample and samples generated by a Time Slicing op-
eration in other Sounds.
1 Go to the Sound
assign the multisample to.
If you prefer to start from blank programming, choose the
command from the page menu.
2 Go to the Sound > Basic > OSC
3 Choose the new
two layers (High
4 Choose the Write Sound
to an empty User location.
mode, and choose a Sound similar to the one you want to
page, and select one of the oscillators.
multisample from the
or Low).
command from the page menu, and save the Sound
RAM area, and assign it to one of the
Initialize Sound