434|
Customizing and editing the Sounds
axis. However if the EG settings etc. have already raised the volume to its
maximum level, the volume cannot be increased further.
With negative (–) values of this parameter, the volume will decrease when
pressure is applied to the keyboard.
Modulating amplitude with the LFOs
LFO is a cyclic modulation. Applied to the amplitude it produces an effect
usually called 'tremolo'.
▪
Go to the
Sound > Amp > LFO
▪
Use the
LFO 1/2 > Intensity
the cyclic modulation that LFO 1/2 (set in the LFO > LFO 1 and LFO 2 pages)
will apply on the amp EG. Negative (–) settings will invert the phase.
Change in cutoff
Low setting
▪
Use the
AMS
ume of the amp for the selected oscillator.
The
Intensity
AMS.
page.
parameters (-99...+99) to adjusts the effect of
High setting
pop-up to select a modulation source for the LFO Intensity vol-
parameter (-99...+99) specifies the depth and direction of the