Table of Contents
Advertisement
c
Preset Type
Src
Amt
d
Custom Mix
Src
Amt
e
Custom Depth
Src
Amt
f
Custom Speed
[Hz]
Src
Amt
g
Wet/Dry
Src
Amt
b: Control Mode
c: Preset Type
d: Custom Mix
e: Custom Depth
f: Custom Speed [Hz]
If Control Mode=Preset, you can use c: Preset Type to select the effect.
In this case, the Custom Mix/Depth/Speed settings are ignored. If Control
Mode=Custom, the Custom Mix/Depth/Speed settings are valid, and the c:
Preset Type setting is ignored.
V1, C1, V2, C2,
Selects the effect type when Mode=Preset
V3, C3
V1/V2/V3 are variations of vibrato, and C1/C2/
C3 are variations of chorus
Off...Tempo
Selects the modulation source that will change
the effect type
–5...+5
Sets the modulation amount for changing the
effect type
Vibrato,
Sets the mix level of the direct sound when
1:99...99:1,
Mode=Preset
Chorus
Off...Tempo
Selects the modulation source that will control
the mix level of the direct sound
–100...+100
Sets the modulation amount for controlling the
mix level of the direct sound
0...100
Sets the vibrato depth
Off...Tempo
Selects the modulation source that will control
vibrato depth
–100...+100
Sets the modulation amount for controlling the
vibrato depth
0.02...20.00
Sets the vibrato speed
Off...Tempo
Selects the modulation source for controlling
the vibrato speed
–20.00...
Sets the modulation amount for controlling the
+20.00
vibrato speed
Dry, 1:99...99:1,
Balance between the wet and dry signal
Wet
Off...Tempo
See DMS (Dynamic Modulation Source)
–100...+100
Amount of modulation source
Effect parameters |647
Advertisement
Table of Contents
