Equalizing the Sound
You can use a three-band, semi-parametric equalizer on each oscillator.
▪
Go to the
Sound > Basic > EQ
Activating the EQ
▪
Select the
Enable
lator.
Trimming and programming the EQ
▪
Use the
Trim
izer (0...99). Extreme equalization values can overload the audio circuits and
lead to distortion. This control lets you set equalization as desired, and at the
same time avoid overloading.
▪
Use the
EQ controls
EQ Control
Low Gain
Mid (Middle) Gain
Mid (Middle) Freq
Hi (High) Gain
page.
checkbox to activate the equalizer on the selected oscil-
knob to limit the level of the signal passing through the equal-
to create the equalization curve.
Meaning
Low frequencies equalization. This is a shelving
curve filter.
Middle frequencies equalization. This is a bell
curve filter.
Centre frequency of the middle frequencies
equalization.
High frequencies equalization. This is a shelving
curve filter.
Editing the Sounds |399
Value
-18...+18dB
-18...+18dB
0.100...10kHz
-18...+18dB