Table of Contents
Advertisement
356|
Customizing, recording and editing the Songs
Converting notes to RX Noises
You can go to the
RX Noises, and vice-versa. This will help programming Songs on an external
sequencer.
1
Go to the
Sequencer > Song Edit > Utility
2
Edit the parameters, and choose the commands.
▪
Use the
Track
to set the volume level of the RX Noises in the selected track(s). When done,
touch the
Execute
track
All
Track 1 ... 16
▪
Touch the
Execute
automatically analyze the Standard MIDI File, and add RX Noises to Guitar
tracks.
This command scans the whole Standard MIDI File, looking for guitar strum-
ming played by nylon, steel or electric guitars. After scanning, a suitable
Guitar sound will be automatically assigned to the relevant tracks, and RX
Noises automatically added where needed.
▪
Touch the
Execute
convert the RX Noises to ordinary MIDI Notes.
▪
Touch the
Execute
to convert all the relevant MIDI Notes to RX Noises.
Utility
page to convert notes of a Standard MIDI File into
parameter to choose a track, then use the
button.
Meaning
All tracks.
Selected track.
button next to the
button next to the
button next to the
page.
Add to Guitar Tracks
Convert to MIDI Notes
Convert from MIDI Notes
Velocity
parameter
parameter to
parameter to
parameter
Advertisement
Table of Contents
