Korg PA1000 User Manual page 755

e Depth
Src
Amt
f Pan
g Wet/Dry
Src
Amt
a: Pitch Shift [cents]
e: Depth
These parameters set the amount of pitch shift and amount of modulation
by means of the LFO.
Pitch
Original Pitch
g: Pan
h: Wet/Dry
The Pan parameter pans the effect sound and dry sound to the left and right.
With L, the effect sound is panned left, and the dry sound is panned right.
With a Wet/Dry = Wet setting, the effect and dry sound will be output in a
proportion of 1:1.
–100...+100 Sets the LFO modulation depth for pitch
shift amount
Off...Tempo Selects the modulation source of the depth
of modulation
–100...+100 Sets the modulation amount of the depth
of modulation
L, 1 : 99...99 : 1, R Sets the panning effect sound and dry
sound separately
Dry, 1:99...99:1, Balance between the wet and dry signal
Wet
Off...Tempo See DMS (Dynamic Modulation Source)
–100...+100 Amount of modulation source
Pitch Shift Mod - Pitch Shift / Depth
LFO Waveform=Triangle
Depth (+value)
Pitch Shift (+ value)
LFO Waveform=Square
Depth (–value)
Effect parameters |743