Korg PA1000 User Manual page 723

a Frequency Bottom
Frequency Top
b Sweep Mode
Src
Respon
c Envelope Sens
Envelope Shape
d LFO Frequency [Hz]
Src
Amt
e MIDI Sync
BPM
Base Note
Times
f Resonance
Low Pass Filter
g Output Level
Src
Amt
h Wet/Dry
Src
Amt
0...100 Sets the lower limit of the wah center fre-
quency
0...100 Sets the upper limit of the wah center
frequency
Auto, D-mod, Selects the control from auto-wah, mod-
LFO ulation source, and LFO
Off...Tempo Selects the modulation source for the
wah when Sweep Mode=D-mod
0...100 Sets the response speed when Sweep
Mode = Auto or D-mod
0...100 Sets the sensitivity of auto-wah
–100...+100 Sets the sweep curve of auto-wah
0.02...20.00 Sets the speed of the LFO
Off...Tempo Selects a modulation source for LFO
speed
–20.00... Sets the modulation amount of LFO
+20.00 speed
Off, On When this is on, the LFO speed is set by
BPM, Base Note, and Times, instead of
Frequency
MIDI, MIDI syncs to the system tempo; 40–300
40.00... sets the tempo manually for this individ-
300.00 ual effect
Selects the type of notes that specify the
...
LFO speed
x1...x32 Sets the number of notes that specify the
LFO speed
0...100 Sets the resonance amount
Off, On Switches the wah low pass filter on and
off
0...100 Sets the output level of the effect sound
Off...Tempo Selects the modulation source that will
control the effect output level
–100...+100 Sets the modulation amount of the effect
output level
Dry, 1:99...99:1, Balance between the wet and dry signal
Wet
Off...Tempo See DMS (Dynamic Modulation Source)
–100...+100 Amount of modulation source
Effect parameters |711