Korg PA1000 User Manual page 628

616| Effects for the Sounds, Voice, Guitar
a Delay Time [msec]
b LFO Waveform
LFO Phase [degree]
c LFO Frequency [Hz]
Src
Amt
d LFO Step Freq [Hz]
Step Amt
e MIDI Sync
BPM
Base Note
Times
f Step Base Note
Times
g Depth
h Feedback
High Damp [%]
i Wet/Dry
Src
Amt
0.0...50.0 Sets the delay time from the original
sound
Step-Tri, Selects the LFO Waveform
Random
–180...+180 Sets the LFO phase difference between
the left and right
0.02...20.00 Sets the speed of the LFO
Off...Tempo Selects the modulation source used for
both LFO speed and step speed
–20.00... Sets the modulation amount of LFO speed
+20.00
0.05...50.00 Sets the LFO step speed (speed that
changes in steps)
–50.00... Sets the modulation amount of LFO step
+50.00 speed
Off, On When this is on, the LFO speed is set by
BPM, Base Note, and Times, instead of
Frequency
MIDI, MIDI syncs to the system tempo; 40–300
40.00... sets the tempo manually for this individ-
300.00 ual effect
Selects the type of notes that specify the
...
LFO speed
x1...x32 Sets the number of notes that specify the
LFO speed
Selects the type of notes to specify the
...
LFO step speed
x1...x32 Sets the number of notes to specify the
LFO step speed
0...100 Sets the depth of LFO
modulation
–100...+100 Sets the feedback amount
0...100 Sets the feedback damping amount in the
high range
-Wet, -1:99... Balance between the wet and dry signal
Dry...99:1, Wet
Off...Tempo See DMS (Dynamic Modulation Source)
–100...+100 Amount of modulation source