Setting The Routing And Mixing The Effects - Korg PA1000 User Manual

Setting the routing and mixing the effects

Selecting the impedance and routing
By default, the audio inputs are enabled for a microphone. You can use the
following procedure to select a different input impedance and signal routing,
or re-enable the microphone input.
1 Go to the Global > Audio & Video > Audio In
2 Use the Audio In
audio In
Line
Mic
pop-up menu to choose the correct routing and impedance.
Meaning
The LEFT and RIGHT audio inputs will go to the final mix, together with the
sounds generated by Pa1000. No Voice or Guitar Processor effect will be ap-
plied. The audio inputs will also go to the internal MP3 recorder.
The LEFT audio input will go to the Voice Processor, then to the final mix,
together with the sounds generated by Pa1000. The RIGHT audio signal will
be replicated on both audio outputs. Both inputs will be recorded when re-
cording an MP3 Song.
Connecting the audio inputs |505
page.