Programming The Pitch Envelope (Pitch Eg) - Korg PA1000 User Manual

414| Customizing and editing the Sounds

Programming the pitch envelope (Pitch EG)

Pa1000 includes a pitch envelope generator (Pitch EG) that can vary the
pitch over time.
▪
Go to the Sound > Pitch > EG
You can see the shape of the envelope in the diagram on top of the page.
Setting the Pitch EG levels and times
Pitch EG can be programmed by setting the
the envelope segments.
Time-varying pitch settings (when Pitch EG Intensity = +12.00)
+99 = approximately 1 octave
0 = pitch when
key is held
(sustained)
Start Level
–99 = approximately 1 octave
▪
Use the Level
EG Level
Start
Attack
Release
page.
Attack Level
Note-on
Attack Decay
Time Time
parameters (-99...+99) to specify the amount of pitch change.
Meaning
Amount of pitch change at note start.
Amount of pitch change when the attack time has elapsed.
Amount of pitch change when the release time has elapsed.
Level
Note-off
Time
Release Level
Release Time
and Time parameters of