Korg PA1000 User Manual page 657

a OSC Mode
Pre LPF
b Fixed Frequency
[Hz]
Src
Amt
c Note Offset
Note Fine
d LFO Frequency
[Hz]
Src
Amt
e MIDI Sync
BPM
Base Note
Times
f LFO Depth
Src
Amt
g Wet/Dry
Src
Amt
Fixed, Note (Key Switching between specifying the oscillator
Follow) frequency and using a note number
0...100 Sets the damping amount of the high range
input to the ring modulator
0...12.00k Sets the oscillator frequency when OSC
Mode is set to Fixed
Off...Tempo Selects the modulation source for the os-
cillator frequency when OSC Mode is set to
Fixed
–12.00k... Sets the modulation amount of the oscillator
+12.00k frequency when OSC Mode is set to Fixed
–48...+48 Sets the pitch difference from the original
note when OSC Mode is set to Note (Key
Follow)
–100...+100 Fine-adjusts the oscillator frequency
0.02...20.00 Sets the speed of the LFO
Off...Tempo Selects a modulation source for LFO speed
–20.00... Sets the modulation amount of LFO speed
+20.00
Off, On When this is on, the LFO speed is set by BPM,
Base Note, and Times, instead of Frequency
MIDI, MIDI syncs to the system tempo; 40–300
40.00... sets the tempo manually for this individual
300.00 effect
Selects the type of notes that specify the
...
LFO speed
x1...x32 Sets the number of notes that specify the
LFO speed
0...100 Sets the depth of LFO modulation for the os-
cillator frequency
Off...Tempo Selects the modulation source of the depth
of modulation
–100...+100 Sets the modulation amount of the depth of
modulation
Dry, 1:99...99:1, Balance between the wet and dry signal
Wet
Off...Tempo See DMS (Dynamic Modulation Source)
–100...+100 Amount of modulation source
Effect parameters |645