452|
Customizing and editing the Sounds
36
Writing the Sounds
Writing the edited Sound
After editing, you can save all the edited parameters into a User Sound loca-
tion in memory.
Note:
Changes can only be saved onto User Sounds.
1
While in
Sound Edit
menu
to open the
Sound bank
Sound location
2
You may change the
open the
virtual keyboard
When done editing the name, confirm by touching the
virtual keyboard.
3
When back to the
cation touch the
a location as if you were choosing a Sound. Blank locations are shown as a
series of dashes ('–––').
4
When back at the
ing the
OK
button.
Some notes about writing the Sounds
▪
If you write over an existing Sound, the existing Sound will be deleted. Please
save on a storage device any User Sound you don't want to lose.
▪
Ordinary Sounds cannot be written over Drum Kit locations. Drum Kits can-
not be written over standard Sound locations.
mode, choose the
Write Sound
dialog.
name
of the Sound. Touch the
and edit the name.
Write Sound
dialog, if you want to save onto a different lo-
Select
button and open the
Write Sound
dialog, confirm the Write operation by touch-
Write Sound
command from the
Sound name
Text Edit (
OK
Sound Select
page
Touch to open
the Sound Select
window
)
icon to
button under the
window. Choose