Table of Contents
Advertisement
trigger Mode (How)
Cycle 2
Random
Choosing a delay before note start
▪
Use the
Delay
key (or in general triggering the oscillator) and hearing the beginning of the
sound.
Reversing the controllers
▪
Select the
OSC Off when Sound Controllers are On
the way Sound Controllers work. With this parameter checked, the current
oscillator will not play when one of the Sound Controllers (Sound Controller
1, Sound Controller 2, Sound Controller Y+, Sound Controller Y-) is activated.
It should be applied to oscillators with the After Touch, Joystick Y+, Joystick
Y-, Normal, Legato, Legato Up, Legato Down, Not Legato, Cycle 1, Cycle 2,
and Random trigger modes, that can be turned off by using a switch, foot-
switch or the joystick programmed as a Sound Controller.
Meaning
As the above, for use with a different (and parallel) group of oscilla-
tors. Having two Cycle Trigger Modes allows for cycling stereo mul-
tisamples.
As the above, but with a random selection of oscillators within the
assigned group.
parameter to set a lapse (0...5000ms) between pressing a
Editing the Sounds |393
checkbox to reverse
Advertisement
Table of Contents
