Korg PA1000 User Manual page 753

b Pitch Shift [1/2tone]
Src
Amt
c Fine [cents]
Amt
d BPM
Time Over?
e Delay Base Note
Times
f Feedback Position
g Feedback
High Damp [%]
h Input Level Dmod [%]
Src
i Wet/Dry
Src
Amt
d: BPM
e: Delay Base Note
e: Times
The delay time is the duration of "Times" number of "Delay Base Note" note
values at the "BPM" tempo (or if "BPM" is set to MIDI, the tempo determined
by MIDI Clock).
–24...+24 Sets the pitch shift amount in steps of a
semitone
Off...Tempo Selects the modulation source of pitch
shift amount
–24...+24 Sets the modulation amount of pitch shift
amount
–100...+100 Sets the pitch shift amount in steps of one
cent
–100...+100 Sets the modulation amount of pitch shift
amount
MIDI, MIDI syncs to the system tempo; 40–300
40.00... sets the tempo manually for this individual
300.00 effect
---, OVER! Displays an error message when the delay
time exceeds the upper limit
Selects the type of notes to specify the de-
...
lay time
x1...x32 Sets the number of notes to specify the
delay time
Pre, Post Switches
connection
–100...+100 Sets the feedback amount
0...100 Sets the damping amount in the high range
–100...+100 Sets the modulation amount of the input
level
Off...Tempo Selects the modulation source for the in-
put level
Dry, Balance between the wet and dry signal
1:99...99:1,
Wet
Off...Tempo See DMS (Dynamic Modulation Source)
–100...+100 Amount of modulation source
Effect parameters |741
the feedback