Table of Contents
Advertisement
422|
Customizing and editing the Sounds
▪
Use the
Ramp Low/High
tracking (-99...+99).
Cutoff frequency
Low Ramp=+99
Low Ramp=+43
Low Ramp=0
Low Ramp=–62
Low Ramp=–99
▪
Set the
Intensity to A
the depth and direction of the changes applied to filters A and B.
For the range of notes between Key Low and Key High, the cutoff frequency
will change according to the keyboard location (pitch).
Modulating the Filter EG (Envelope Generator)
The filter envelope can be controlled while playing.
▪
Use the
Velocity to A/B
tion of the effect that velocity will have on the time-varying changes created
by the filter EG (as set on Filter > Filter EG) to control the filter A/B cutoff
frequency.
With positive (+) values, playing more strongly will cause the filter EG to pro-
duce greater changes in cutoff frequency. With negative (–) values, playing
more strongly will also cause the filter EG to produce greater changes in
cutoff frequency, but with the polarity of the EG inverted.
▪
Use the
Int to A/B
of the effect that the time-varying changes created by the filter EG will have
on the filter A/B cutoff frequency.
With positive (+) settings, the sound will become brighter when the EG levels
set by Filter EG Level and Time parameters are in the '+' area, and darker
when they are in the '–' area.
With negative (–) settings, the sound will become darker when the EG levels
set by Filter EG Level and Time parameters are in the '+' area, and brighter
when they are in the '–' area.
parameters to specify the slope of the keyboard
High Ramp=+99
High Ramp=+62
High Ramp=0
High Ramp=–43
High Ramp=–99
Key
Low Key
High Key
and
Intensity to B
parameter (99...+99) to specify the depth and direc-
parameters (-99...+99) to specify the depth and direction
parameters (-99...+99) to specify
Advertisement
Table of Contents
