Korg PA1000 User Manual page 740

728| Effects for the Sounds, Voice, Guitar
c MIDI Sync
BPM
Base Note
Times
d Mod. Depth
Trim
e Voice1: Pitch
Fine [cents]
Level
f Voice1:
Resonance
High Damp [%]
Pan
g Voice2: Pitch
Fine [cents]
Level
h Voice2:
Resonance
High Damp [%]
Pan
i Wet/Dry
Src
Amt
a: Control Mode
f: Voice 1: Resonance
h: Voice 2: Resonance
This parameter determines the resonance intensity.
Off, On When this is on, the LFO speed is set by BPM,
Base Note, and Times, instead of Frequency
MIDI, MIDI syncs to the system tempo; 40–300 sets
40.00...300.00 the tempo manually for this individual effect
Selects the type of notes that specify the LFO
...
speed
x1...x32 Sets the number of notes that specify the LFO
speed
–100...+100 Sets the amount of resonance intensity con-
trol via LFO/D-mod
0...100 Sets the input level at the resonator
C0...B8 Sets the voice1 Pitch for resonance
–50...+50 Fine-adjusts the voice 1 pitch for resonance
0...100 Sets the Voice1 output level
–100...+100 Sets the intensity of resonance when Control
Mode = Manual
0...100 Sets the damping amount of resonant sound
in the high range
L6...L1, C, R1...R6 Sets the Voice1 stereo image
C0...B8 Sets the voice 2 Pitch for resonance
–50...+50 Fine-adjusts the voice 2 pitch for resonance
0...100 Sets the Voice2 output level
–100...+100 Sets the intensity of resonance when Control
Mode = Manual
0...100 Sets the damping amount of resonant sound
in the high range
L6...L1, C, R1...R6 Sets the Voice2 stereo image
Dry, 1:99...99:1, Balance between the wet and dry signal
Wet
Off...Tempo See DMS (Dynamic Modulation Source)
–100...+100 Amount of modulation source