404|
Effects for the MIDI Sounds
c: Attack
This parameter controls the attack level.
Level
Attack=80
Attack=20
Dry
2: Stereo Limiter
The Limiter regulates the input signal level. It is similar to the Compressor,
except that the Limiter compresses only signals that exceed the specified
level to lower unnecessary peak signals. The Limiter applies a peaking-type
EQ to the trigger signal (which controls the degree of the Limiter effect), al-
lowing you to set any band width to be covered. This effect is a stereo limiter.
You can link left and right channels, or use each channel individually.
Stereo In - Stereo Out
Left
+
Envelope Source
Right
FX Control BUS 1
FX Control BUS 2
a
Envelope Select
b
Ratio
c
Threshold [dB]
v
Attack
Release
Compressor - Attack
Wet
Side PEQ
Envelope - Control
Envelope - Control
Envelope Select
L/R Mix,
L Only, R Only,
L/R Individually
1.0 : 1...
50.0 : 1,
Inf : 1
–40...0
1...100
1...100
Time
FX Amt
Gain Adjust
Limiter
Trigger Monitor
Limiter
Gain Adjust
FX Amt
Selects from linking both channels,
controlling only from left channel,
only from the right channel, or con-
trolling each channel individually
Sets the signal compression ratio
Sets the level above which the com-
pressor is applied
Sets the attack time
Sets the release time