Table of Contents
Advertisement
4
Use the
Start Tick
of the passage to be quantized.
If a Chord Variation is four measures long, and you want to select it all, the
Start will be positioned at 1.01.000, and the End at 5.01.000.
5
Use the
Bottom Note
These parameters are only available when a Drum or Percussion track is
selected. If you select the same note as the Bottom and Top parameters, you
can select a single percussive instrument in a Drum Kit.
6
After having set the various parameters, touch Execute.
7
Press the
START/STOP
again to stop playback.
Transposing
The transpose function may be used to transpose the selected track(s).
After transposing, please don't forget to readjust the
in the main page of the
1
Go to the
Style/Pad Record > Style/Pad Edit > Transpose
2
Select the Track, Style Element (E) and Chord Variation (CV) to edit.
track
All
Drum ... Acc5
and
End Tick
parameters to set the beginning and ending
and
Top Note
button to check how it works. Press
Style/Pad Record
Meaning
All tracks selected, apart for the tracks set in Drum mode (like the
Drum and Percussion tracks). The whole selected Chord Variation
will be transposed.
Selected track.
Editing the Styles and Pads |277
parameters to set key range to edit.
Key/ Chord
mode.
START/STOP
parameter
page.
Advertisement
Table of Contents
