Table of Contents
Advertisement
394|
Customizing and editing the Sounds
Setting the velocity and key zone
You can limit the selected oscillator to play inside a defined velocity zone
and key range. This will allow for creating different key and velocity layers.
▪
Go to the
Sound > Basic > Velocity/Range
Setting a velocity zone
▪
Use the
Velocity Zone (Top
velocity zone for the selected oscillator.
Setting a key range
▪
Use the
Keyboard Range (Top Key
specify the note range for the selected oscillator.
Scaling the received velocity values
▪
Use the
Scaled Velocity (Top
velocity values received by the oscillator. By using the Velocity Zone, an os-
cillator may be limited to a restricted range (say, 10 to 20), that may result in
weak dynamics when the associated sample is triggered.
By assigning a different value to these parameters, the restricted range will
be expanded to a wider range (for example, the lowest range value of 10 may
be converted to a Scaled Velocity value of 0, and the highest range value of
20 may be converted to a Scaled Velocity value of 127). All values included
between the minimum and maximum value are scaled accordingly.
As a consequence, you can create an RX Sound of guitar, by assigning
the guitar fret noise to the 10~20 velocity range. When a dynamics value
between 10~20 is received, the real velocity value is scaled to the Scaled
Velocity values, and will play louder.
page.
and Bottom) parameters (0...127) to specify the
and
Bottom
and Bottom) parameters (0...127) to scale the
Key) parameters (C-1...G9) to
Advertisement
Table of Contents
