Table of Contents
Advertisement
934|
File management
Restoring the musical resources
You can restore data from a backup archive created with the
Backup
command.
Choose the restore command
1
Go to the
Media > Utility
2
Select the
Resource Restore
the file selector.
Choose the source device and folder
1
If you are restoring from an external device, connect the device to the
HOST
ports.
2
Use the
Device
3
Browse through the folders. Touch the
folder. Touch the
4
When the backup archive appears, select it and touch the
Choose the data to restore
5
After touching Restore, a dialog will appear, with a list of types of data to be
restored. Only check the types of data you want to restore.
6
Touch
OK
to start restoring.
Warning:
This command will delete from the internal memory all types of data se-
lected in this dialog box (including your custom data).
7
When done, a message will appear, asking you to restart the instrument
('Data Restored. Please switch off'). Turn the instrument off, then turn it on
again.
page.
option, then touch the
pop-up menu to choose the target device.
Close
button to close the current folder.
Execute
Open
button to open the selected
Restore
Full Resource
button to see
USB
command.
Advertisement
Table of Contents
