404|
Customizing and editing the Sounds
Equalizing the Drum Kit
Each of the drum samples can be processed with a three-band, semi-para-
metric equalizer.
▪
Go to the
Sound > DrumKit > EQ
Choosing the key to edit
▪
Use the
Key
parameter to select a key. As an alternative, select it by pressing
a key on the keyboard.
The
Layers
and
Trimming and programming the EQ
▪
Select the
Enable
▪
Use the
Trim
izer (0...99). Extreme equalization values can overload the audio circuits and
lead to distortion. This control lets you set equalization as desired, and at the
same time avoid overloading.
Assign
parameters are the same of the
checkbox to activate the equalizer on the selected layer.
knob to limit the level of the signal passing through the equal-
page.
Sample Setup
page.